A Tip for Correct Exposure in Snow
How to turn snow from a problem into a clean, sharp, bright image
Why your camera turns snow gray, and how to fix it with exposure, metering and the histogram.
One of the most common problems in snow and ice photography is that the camera’s metering produces an image that is too dark. The reason is simple.
The light meter is built to calibrate the scene so it looks like middle gray, about 18 percent. That is the fixed reference point every camera in the world works with. When everything around you is white, the camera wrongly assumes the white is too bright and tries to darken it into that gray.
The result is gray, lifeless snow.
To get around this, you need to let the camera know that you want white to stay white. The solution is to increase the exposure, usually by one to two stops of light, depending on how much white is in the frame and the direction of the light.
- Manual (M) mode: one to two stops, depending on the light, taking care not to blow out the highlights.
- AUTO ISO, A or S mode: use positive exposure compensation of between +1 and +2 to get white snow with a clean, clear texture.

In addition, the recommended metering in snow is center-weighted or spot metering on the bright area. Aim the meter at the whitest part of the scene and balance the exposure so the white is bright but not blown out. This gives you control and prevents surprises.
I pay particular attention to the histogram and the zebra stripes on the camera screen (note that not every camera has this feature).
If the zebra stripes start flashing on the ice itself, I stop. But if they appear only on strong reflections or shiny spots, it is not a significant problem.
What matters is that the texture stays clear and the white stays white.
It is a small tip that completely changes the result.
Once you understand the 18 percent principle and the correction it requires, snow turns from a problem into an opportunity for a clean, sharp and bright image, just as it really is.
